HeaderBlack2
ButBarHome
Pixquto
HeadSLIREB

JBI Corporation can perform any electrical testing on automotive type batteries. We perform Reserve Capacity, Cn Discharges, Cold Cranking Performance, and Life Cycle Testing. We can test at temperatures from -40oC to 80oC. Testing at temperatures of 25oC to 75oC can be done in water baths or air.

Reserve Capability & Cn
JBI can perform capacity test discharges up to 2000A. All reserve capacity and Cn testing is done in water baths to ensure proper testing temperatures are maintained.

48 Volt System Testing
JBI has the capability to test and cycle batteries in a range of 0-75 volts and 0-500 amps.

CCA & High Rate Testing
High rate discharge testing, such as CCA tests, can be performed using our custom-build 2000 amp high rate discharger. This discharge has a built-in PC with temperature logging capability and will record all data. It can discharge to 0 volts.

Life Cycle Testing
Over 200 cycling circuits from 25 to 2000 amperes, maximum 18 volts are available. These are fully programmable by PC and will record all data. All circuits can be used in conjunction with water baths that are adjustable to 75oC for running the common SAE “hot” J240 life cycle test and the J2801 life cycle test. JBI can also perform the GM CERT Test.

Additional Automotive Services

  • Fleet Test Management
  • Battery Longevity Study
  • Vent Testing
  • Gassing Rate Testing
  • Water Loss Testing
  • Vibration Testing
  • Self-Discharge Testing
  • Charge Acceptance Testing
  • Thermal Shock Testing

We can also perform Product Validation or PV testing as required by Ford, Chrysler, GM, Toyota, Nissan, Honda and others.
A2LALogoWeb